Posted in

How to clean a water plastic tank for drinking?

Hey there, if you’re reading this, chances are you’ve got a plastic water tank sitting somewhere (probably in your garage, backyard, or maybe even a rural property you use for storing drinking water) and you’re wondering, “Wait, how do I actually clean this thing so the water going in it is safe to sip?” As a plastic tank supplier, I’ve talked to hundreds of folks who either just bought their first tank, or have had theirs kicking around for years and realized they haven’t given it a proper deep clean since day one. Let me tell you—most people skip this step, and end up with weird tastes, mold, or even bacteria that makes them sick. I’m gonna walk you through exactly what to do, no fancy tools, no overcomplicated steps, just science-backed stuff that works for food-grade plastic (since that’s all we supply for drinking water, by the way). Plastic Tank

First off, let’s get one thing straight: not all plastic tanks are the same. If you bought a cheap non-food-grade tank for storing chemicals or garden runoff, that’s a whole different ballgame, but if you got ours (or any reputable food-grade polyethylene tank), that’s what we’re focusing on here. Food-grade plastic is designed to not leach harmful stuff into water, but it does get grimy, and that’s the part we need to clean. I always tell customers—wait 2-3 weeks after you get your new tank, even if it says “pre-cleaned,” do a full deep clean before putting any drinking water in it. The factory residue, dust, and tiny plastic particles that collect during shipping? Yeah, that’s stuff you don’t want in your morning glass.

Let’s start with the basics: what supplies do you actually need? No bleach that’s scented, no harsh detergents, no wire brushes that’ll scratch the plastic (scratches hold gunk forever). Here’s the go-to list from what we recommend and what I’ve seen work for 100+ customers:

  • Warm (not hot—hot can warp some plastic) water, like tap water straight from the faucet on high
  • Regular old unscented bleach (just plain sodium hypochlorite, no extra additives)
  • Baking soda, a whole box worth if your tank’s big
  • A soft, non-abrasive sponge or a clean microfiber cloth—nothing with scrubbers that’ll scratch
  • A long-handled brush (like a toilet brush but new, or even a pool skimmer with a soft pad) if your tank’s tall enough that you can’t reach the bottom
  • A garden hose with a spray nozzle on high pressure (super helpful for flushing all the gunk out)
  • Optional, but nice: a few drops of lemon juice if you’ve got super strong tastes you want to cut, but totally not necessary

Now, timing matters. Don’t try to do this on a rainy day, because you don’t want rainwater getting back into your clean tank mid-process. Pick a sunny, dry day—sunlight will actually help kill any leftover bacteria while the tank’s drying, which is a bonus. Also, make sure your tank is completely empty, and if it’s been sitting and had old water in it, dump that first far away from any plants you care about—old water with bacteria can mess with roots.

Step 1: Rinse out loose gunk first. Take your garden hose and blast every corner of the tank, including the bottom, the sides, and around the opening. Use the spray nozzle on the strongest setting you’ve got—this will knock loose any dirt, leaves, or slime that’s just sitting there, no scrubbing needed yet. I always tell people to do this outside, because it gets messy, and you don’t want that gunk on your kitchen floor. If your tank has a vent or an overflow valve, make sure you run water through those too—small spots like that hold way more gunk than you’d think.

Step 2: Make your cleaning solution. Here’s where the bleach comes in, but don’t overdo it. For a standard 50-gallon tank (that’s the most common size we sell for residential use), you only need 1/4 cup of unscented bleach mixed with enough warm water to fill 1/4 of the tank. If your tank’s bigger, like 100 gallons, bump that up to 1/2 cup, max. The key here is dilution—bleach is super powerful, but too much leaves a weird taste that’s hard to get rid of, and also isn’t great to ingest. Then add 1/2 cup of baking soda to that mix—baking soda cuts through tough stains and neutralizes the bleach, so you don’t end up with a chemical taste. Stir it around a bit, or put the tank’s lid back on and swish it gently (don’t shake too hard, you’ll spill it).

Step 3: Scrub every surface, but be gentle. Now, that soft sponge or microfiber cloth is your best friend. Don’t use a metal brush—scratch marks in plastic are like little homes for mold and bacteria, and they’re almost impossible to get out. For the inside sides, get in there with your sponge, working the solution into every nook. If you’ve got stubborn spots, like that dark gunk that sticks to the bottom after months of disuse, a little extra baking soda directly on the spot works way better than scrubbing hard. Don’t forget the top edge, where the lid sits—most people miss that, and that’s where mold starts growing first because it’s always a bit damp. If your tank has a dip tube (the long plastic tube that goes down to the bottom to pull water out), take that out if you can—most of them twist off easily—and scrub it separately too. Dip tubes hold so much gunk, I can’t tell you how many customers bring theirs back saying their water tastes like “plastic” and that’s exactly the spot.

Step 4: Let it soak. This is the step most people rush, and it’s a mistake. Once you’re done scrubbing, put the lid back on (or if it’s an open-top tank, just cover it loosely with a clean towel to keep dirt out) and let the solution sit for at least 30 minutes. For tanks that have been sitting with really gross, moldy water, leave it for an hour—this gives the bleach time to kill all the bacteria and the baking soda time to eat through the stains. Pro tip: if it’s super sunny out, you can leave it with the lid off for part of that soak time, the UV light will help too.

Step 5: Rinse, rinse, rinse. This is the most important step to get rid of that bleach taste. Don’t just do one quick rinse—use your garden hose on high pressure, fill the tank all the way up, then dump it out. Do this at least 4 times, maybe 5 if you used a bit more bleach (but again, we told you not to overdo it). To test if it’s really clean, after the last dump, fill the tank halfway with clean tap water, add a drop of bleach (just a tiny one—like 1/8 teaspoon) and then smell it. If it smells like clean tap water, you’re good. If it smells like bleach, you need to rinse more. I’ve had customers do only 2 rinses and end up with water that tastes like bleach, so don’t skip this.

Step 6: Dry it completely before storing water. I know, I know—you’re excited to fill it up, but leaving a plastic tank damp is a recipe for mold. Prop the lid open (or leave the top off, if it’s open-top) and let it air dry for at least 24 hours. If you have a fan, point it inside the tank, that speeds it up a lot. Avoid putting a towel inside to dry—you might leave lint, which is another thing that holds gunk. Once it’s totally dry (no damp spots anywhere), then you can fill it with clean drinking water.

Wait, what if your tank has mold or really heavy slime? I get it, sometimes people come to us with tanks that have been sitting in a shed for years, and there’s that black mold on the bottom. In that case, don’t use just bleach—add a cup of white vinegar to your solution. Vinegar kills mold way better than bleach, and it’s food-safe. Scrub hard (but still no metal brushes) and let it soak for an hour, then rinse like crazy. If there’s still mold spots, a paste of baking soda and water worked into the spot with a sponge usually takes it right out.

Also, how often should you do this? For regular use—like if you’re filling it every few weeks—do a full deep clean once a year. If you only fill it a few times a year, like for emergency storage, empty it completely every 6 months, rinse it out, and let it dry. That prevents that stale water taste. A quick rinse every time you fill it is also a good idea—just blast the inside with the hose for a minute, no scrubbing needed, to get rid of dust or bugs that might have gotten in.

I should mention—we only sell food-grade polyethylene tanks, so all this advice is tailored to that type of plastic. If you have a different kind of tank, like fiberglass or metal, you’ll need different steps, but for our customers, this is the exact process our team uses to get tanks ready for delivery, too. We don’t cut corners, and neither should you when it comes to water you’re gonna drink.

One last thing—common mistakes I see all the time. First, using harsh chemicals like dish soap with degreasers, or bleach with additives like lemon or scents. Those leave residues that are not safe to ingest. Second, scratching the plastic. Even tiny scratches are bad news because they trap gunk. Third, not letting it dry completely. I’ve had a customer tell me they filled their tank right after rinsing, and a week later their water tasted like mildew—they forgot to dry it. Fourth, using too much bleach. You don’t need a gallon of bleach, a quarter cup for 50 gallons is perfect. Too much bleach can make you sick, so err on the side of less, not more.

If you’re in the market for a tank, or you have questions about maintaining the one you already have, feel free to reach out to our team to chat about what size or type works best for you. We’re here to help make sure your water is clean and safe, no stress.

Indoor Garbage Bins References
U.S. Environmental Protection Agency. (2023). Managing and Maintaining Residential Water Storage Tanks.
Plastics Industry Association. (2022. Food-Grade Polyethylene Tanks: Best Practices for Cleaning and Maintenance.
Centers for Disease Control and Prevention. (2021). Drinking Water Safety in Private and Off-Grid Systems.


Enlightening Pallet Industry Co., Limited
Enlightening Pallet Industry Co., Limited is one of the most professional plastic tank manufacturers and suppliers in China, featured by quality products and competitive price. Please rest assured to wholesale cheap plastic tank for sale here from our factory.
Address: No.339 Hui Xi Road, Jiading District, Shanghai
E-mail: elaine@cnplasticpallet.com
WebSite: https://www.binpallet.com/