Posted in

What tools do I need to install a sintered clutch button?

Hey everyone — it’s Jamie here, part of the team that’s been making sintered clutch buttons for over 10 years now. If you’re here, you’re probably either someone who just bought a set of our sintered clutch buttons and is figuring out how to install ’em right, or maybe a DIY mechanic or racer looking to swap out worn buttons on your own. I’ve seen so many folks skip a step because they think “clutch parts are just easy bolts,” but trust me — skip the right tools, and you’re gonna end up with slipping clutches, weird shifting, or even buttons that fall apart mid-ride. That’s a headache no one needs, especially when we sell sintered clutch buttons because they handle way more heat and torque than organic ones… but only if installed properly. Sintered Clutch Button

Today I’m breaking down every single tool you actually need to get this job done, no fancy shop equipment required. I’m not gonna list random tools you’ll “maybe” use — only the ones that make the install smooth and make your new sintered buttons last as long as they should.

First up, let’s start with the foundation: the tools to get your old clutch out before you even touch the new sintered buttons. You can’t swap buttons with the clutch still tucked inside the engine case, right? So here’s what you need for that first step.

  1. Engine Stand or Clutch Holding Tool
    Wait, why can’t I just hold the engine by hand? For most small engines (motorcycle, ATV, small UTV engines), the crankshaft spins super easily, and if you don’t hold it tight, it’ll twist when you loosen the clutch hub bolts. That’s how you end up stripping bolt heads or even bending the clutch basket. We keep a few cheap clutch holding tools in our warehouse giveaway bin for first-time customers, but a basic engine stand works too — just make sure it’s rated for your engine’s weight. Pro tip: if you’re stuck without either, a big socket extension bar clamped to a workbench will hold the crank still, but don’t use a vice on the crank itself — you’ll mess up the threads.

  2. Socket Set (Metric or SAE, Match Your Clutch Bolts)
    Clutch bolts are tiny, and nothing’s more frustrating than fumbling with a mismatched socket that slips and chews up the bolt head. Our sintered clutch buttons fit most Japanese, European, and American small engines, but double-check your manual for bolt size before you start. I always recommend a 6-point socket over a 12-point — 12-points can round the heads if you’re applying torque, especially if the bolts are a little rusty. Grab a ratchet with a flex head too; you’ll hate fighting the tight angles on the engine side.

  3. Brake Cleaner & Wire Brush
    This one’s not technically a “tool” but I’d consider it a must-have supply. When you pop the old clutch apart, the clutch basket and hub will be caked with old clutch material, grime, and oil. If you don’t clean all that off before installing the new sintered buttons, the buttons won’t seat right, and oil buildup will make them slip way faster. Spray brake cleaner on the clutch parts, then scrub with a small wire brush to get every nook and cranny clean. We include a small can of brake cleaner with most bulk orders of sintered clutch buttons, so keep an eye out for that.

Now, the tools to actually replace the sintered clutch buttons — this is the part most people mess up because they skip the specialty tools, but it’s simple stuff.

  1. Clutch Button Pliers or a Small Flathead Screwdriver
    The old buttons are pressed into the clutch hub, right? They’re not bolted on, so you need something to pry ’em out without damaging the hub. A pair of needle nose pliers works, but I use a dedicated clutch button puller that fits right around the edge of each button and pulls straight out. If you don’t have pliers, a small flathead screwdriver (the thin kind for electronics, not a big wood screwdriver) works — just be gentle, don’t pry too hard or you’ll crack the hub. Pro tip: heat the old buttons with a hair dryer for 30 seconds before prying — the sintered material expands a little, so they come out way easier without breaking.

  2. Press Fit Tool or a Socket That Matches Button Diameter
    Here’s the big one for installing the new sintered buttons. You can’t just tap a button in with a regular hammer — you’ll smash the edges, bend the button, or push it at an angle so it binds in the hub. The correct way is to use a press fit tool, which is a metal rod or socket that’s exactly the same diameter as your sintered clutch button. Hold the button straight in the hub, then tap the tool with a rubber mallet (not a steel hammer — steel will chip the sintered material) until it’s flush with the hub. If you don’t have a dedicated press tool, a deep socket that fits the button’s outer diameter works perfectly. Skip the random metal rod that’s too big — that’ll damage the button.

  3. Torque Wrench
    Wait, torque is just a fancy word for how tight you tighten the bolts, right? A lot of first-timers over-tighten clutch hub bolts, which cracks the hub, or under-tighten, which makes the clutch slip. For our sintered clutch buttons, we recommend tightening the hub bolts to 22-25 ft-lbs (that’s for most 250cc ATVs and motorcycles — check your manual for exact specs). A torque wrench is cheap (you can get a basic one for $20 at any auto parts store) and saves you so much hassle. I’ve seen a customer last year skip the torque wrench, over-tighten the bolts, and crack his clutch basket — he ended up buying a new basket and a set of our buttons, so total waste of time and money.

  4. Feeler Gauge (Optional but Super Useful)
    Once you install all the new sintered clutch buttons, you need to check the “clearance” between the buttons and the clutch plates. If the clearance is too big, the clutch will engage too late; too small, the plates won’t disengage. A feeler gauge is just a set of thin metal strips that measure gap, and it lets you adjust if needed. For our buttons, the ideal clearance is 0.25-0.35mm — stick a feeler gauge of that thickness between the button and the plate; it should slide with a little friction, not too tight or loose. Most people skip this, but it’s what makes our sintered clutch buttons perform the way they’re supposed to, not just sit in the hub.

Now, let’s talk about what you don’t need. I see so many guys grab a random air hammer or a big drill to yank out old buttons — that’s a disaster. Air hammers can crack the clutch hub, which is a $100+ part. Also, don’t use grease on the new buttons — sintered material is porous, so grease will seep into the pores and make the clutch slip. Just make sure the hub is dry and clean before installing.

Once you’ve got all these tools, the install takes about 2 hours for a first-timer, way less if you’ve done it before. Our sintered clutch buttons are made with powdered iron and bronze sintered at high heat, so they handle 30% more torque than organic buttons, but only if installed right. If you cut corners on tools, you’re wasting your money on quality parts, basically.

Bicycle Sintered Buttons If you’re still unsure about the process, or if you need a specific size of sintered clutch button for your engine, hit up our team. We’re not just a supplier — we’re riders and mechanics too, so we can walk you through every step, or even hook you up with a custom order if standard buttons don’t fit. We’ve been in this business long enough to know that the right tools make the right parts work, so we want your install to go smooth so you can get back to riding, racing, or whatever you use your machine for. Don’t hesitate to reach out for bulk orders, replacement buttons, or any questions about what you need for your setup.

References

  1. Small Engine Clutch Installation Guide, Power Sports Industry Association, 2022
  2. Sintered Friction Material Performance Standards, International Organization for Standardization, ISO 6312:2019
  3. Motorcycle Maintenance Best Practices, American Motorcyclist Association, 2021

Fricwel Automotive Limited
Fricwel Automotive Limited is one of the most experienced sintered clutch button manufacturers and suppliers in China, also supports customized service with low price. We warmly welcome you to buy advanced sintered clutch button made in China here from our factory. Also, free sample is available.
Address: No. 819 Shixin Zhong Rd, Xiaoshan, Hangzhou 311203, China.
E-mail: sales@fricwelauto.com
WebSite: https://www.fricwelfriction.com/