{"id":3839,"date":"2026-11-22T08:44:16","date_gmt":"2026-11-22T00:44:16","guid":{"rendered":"http:\/\/www.christianfort.com\/blog\/?p=3839"},"modified":"2026-11-22T08:44:16","modified_gmt":"2026-11-22T00:44:16","slug":"how-to-cut-an-empty-beverage-can-safely-42fa-06feb3","status":"publish","type":"post","link":"http:\/\/www.christianfort.com\/blog\/2026\/11\/22\/how-to-cut-an-empty-beverage-can-safely-42fa-06feb3\/","title":{"rendered":"How to cut an empty beverage can safely?"},"content":{"rendered":"<p>Hey everyone, it\u2019s Jake here from your go-to beverage can supplier\u2014you know, the one that\u2019s got your back when you need reliable cans, fast. Today I\u2019m chatting about something I get asked all the time by folks who come into our warehouse, slide into our DMs, or even hit us up at trade shows: \u201cWait, how do I cut an empty beverage can safely?\u201d <a href=\"https:\/\/www.minjia-packing.com\/metal-food-packaging\/beverage-can\/\">Beverage Can<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.minjia-packing.com\/uploads\/42984\/small\/can-endsbc71f.jpg\"><\/p>\n<p>I get it. Maybe you wanna turn old soda or energy drink cans into planters, keychains, that weird tiny side table someone\u2019s always posting on TikTok, or just get a clean, straight cut for a DIY project. But let\u2019s be real\u2014messing up a can cut (or not using the right tools) is a surefire way to end up with a tiny metal shard in your finger, a cut that bleeds more than your morning coffee, or even a ruined good can if you weren\u2019t just repurposing.<\/p>\n<p>As a can supplier, I\u2019ve seen everything from people using a random kitchen knife (bad, just bad) to those who try to twist a pair of rusty scissors (also bad) and wonder why their cut\u2019s jagged and full of burrs. So let\u2019s break this down like I\u2019m explaining it to a buddy who\u2019s never held a rotary cutter before\u2014no fancy jargon, no overcomplicating, just the actual science and safe steps I\u2019ve picked up (plus a few lessons from when a new warehouse intern tried this last year and nicked their thumb).<\/p>\n<p>First, let\u2019s talk about why empty cans are actually tricky to cut, even when they\u2019re totally empty. You\u2019d think \u201cempty\u201d means it\u2019s just metal, right? Nah. Most standard beverage cans (the 12oz ones you grab at gas stations, the 16oz hard seltzer cans, even the big 24oz ones) are made from either aluminum (most common) or tin-plated steel (think older soda cans, some craft beer ones). Both are thin, but they\u2019re also super malleable\u2014meaning they bend way easier than they slice through cleanly, and those sharp little edges that stick out after a bad cut? Those are the burrs we\u2019re gonna avoid like the plague.<\/p>\n<p>Also, even if you rinsed the can out with a half dozen times, there\u2019s still gonna be residual gunk\u2014sugary soda, coffee, whatever\u2014trapped in the seams. That stuff isn\u2019t dangerous, but it can make the can slippery while you\u2019re cutting, which is another recipe for injury. So step one before you even touch a tool: Prep your can. Don\u2019t skip this. It takes 2 minutes and saves you a trip to the urgent care.<\/p>\n<p>Prep step 1: Rinse it out. Hot water, dish soap, scrub the inside with a bottle brush or even a dish sponge. Pay extra attention to the bottom and the top rim\u2014those are the spots where liquid hangs out. If you\u2019re gonna cut the whole can in half, maybe let it soak for 10 minutes to get any crusty sugar off. Step 2: Dry it COMPLETELY. Damp metal is slippery, and if you\u2019re using a tool like a rotary cutter, moisture can mess with the blade too. Pat it with a towel, even blow it out with a hair dryer if you\u2019re in a hurry. Step 3: Remove any labels or plastic liners. Labels get sticky when wet, they\u2019ll make the can slide, and the plastic is just extra stuff in your way. Peel \u2019em off (use a little warm water if they refuse to come up) and wipe the can down one last time.<\/p>\n<p>Now, let\u2019s talk tools. This is where most people go wrong. You don\u2019t need a $100 metal cutting kit, and you definitely don\u2019t need to use your mom\u2019s kitchen shears (she\u2019ll kill you if you mess those up). I\u2019ve tested every single tool for this\u2014both in my home workshop and with our team\u2019s DIY projects\u2014and the best ones are:<\/p>\n<p>First, for straight cuts (like cutting the top off to make a planter, or slicing the can in half): A rotary tool with a metal cutting wheel, or a utility knife with a fresh, sharp blade. Wait, hold up\u2014sharp is key. A dull knife is way more dangerous than a sharp one, because you have to press harder, and it slips. If you\u2019re going the utility knife route, make sure the blade is extended all the way, and replace it if it\u2019s been used for anything else (like cardboard). For curved cuts (like making a small can lantern, or a custom shape): A pair of heavy-duty tin snips (the ones specifically for metal, not paper or fabric) or a small coping saw with a metal blade. And for total newbies who don\u2019t wanna risk cutting themselves? There are actual can cutting tools\u2014little hand-held things that clamp to the rim and spin, making a perfect circle. I keep one of these in my work bag for quick projects, honestly.<\/p>\n<p>Wait, but hold on\u2014even with the right tool, there\u2019s a safe way to hold the can. Let\u2019s get that out of the way first, because I\u2019ve seen people hold the can like a little club and wonder why it\u2019s spinning around mid-cut. If you\u2019re doing a straight cut, lay the can flat on a stable surface (a workbench, a cutting board, even a thick table\u2014nothing wobbly). If you\u2019re cutting a circle (like the top off), you can hold it in one hand, but keep the other hand curled under the can so your fingers aren\u2019t near the path of the blade. No loose sleeves, no dangly jewelry\u2014those can catch on the tool or the can, leading to a bad time.<\/p>\n<p>Now, let\u2019s get to the actual steps, depending on what you\u2019re cutting. Let\u2019s start with the most common request: Cutting a standard 12oz aluminum can in half, for a planter or a DIY cup. This is what most people want, so let\u2019s nail this.<\/p>\n<p>Step 1: Mark your cut line. Use a ruler and a permanent marker to draw a straight, even line around the can. Don\u2019t eyeball it\u2014you\u2019ll end up with a lopsided cut, and that\u2019s just annoying. Make the line dark so you can see it clearly. If you\u2019re cutting the top off (like to make a little pot), mark it \u00bd to 1 inch below the top rim. That way you have a smooth edge to work with, and you\u2019re not cutting too close to the sharp original rim.<\/p>\n<p>Step 2: Secure the can. If you\u2019re using a utility knife or rotary tool, lay it flat on your work surface, with the marked line facing up. You can tape the edge of the can to the workbench with a little masking tape to keep it from spinning. Super important\u2014no movement mid-cut.<\/p>\n<p>Step 3: Start cutting. If you\u2019re using a utility knife: Hold the knife at a 45-degree angle to the can. Score the line first\u2014don\u2019t push all the way through the metal on the first pass. Go around the line 3 or 4 times, applying a little more pressure each time, until you cut all the way through. If you rush and push too hard on the first pass, the knife will slip and you\u2019ll cut your hand. If you\u2019re using a rotary tool: Attach the metal cutting wheel, put on safety glasses (I cannot stress this enough\u2014metal shavings fly everywhere), turn it on, and slowly run the wheel along the marked line. Don\u2019t press hard\u2014let the tool do the work. You don\u2019t need to muscle it, and pressing too hard will cause burrs.<\/p>\n<p>Step 4: Deburr the edge. This is non-negotiable. The cut is done, but the edge is super sharp\u2014like, sharp enough to slice paper. Take a piece of fine-grit sandpaper (220 grit works perfect) and rub it back and forth along the cut edge for 30 seconds. If you\u2019re fancy, you can use a metal file, but sandpaper is way easier for beginners. Run your finger along the edge (gently!) to make sure there are no sharp spots. If it feels even, you\u2019re good. If not, sand a little more.<\/p>\n<p>Wait, what if you\u2019re using tin snips for curved cuts or smaller projects? Let\u2019s go over that. Tin snips are great if you don\u2019t have a rotary tool, and they\u2019re way cheaper than buying one. The key here is using the right snips: Left-cut, right-cut, or straight-cut snips. For most small curves, straight-cut snips work fine, but if you\u2019re making a tight curve, use left or right-cut snips to follow the line. Mark your line first, just like before, hold the can firmly, and snip along the line slowly. Don\u2019t snip too fast\u2014you\u2019ll bend the metal and get a jagged edge. After you\u2019re done, deburr the edge too\u2014snips leave their own sharp little nicks, so sand that edge down.<\/p>\n<p>Now, I need to talk about safety. This is the part that can\u2019t be skipped, because I\u2019ve seen way too many people ignore this and end up hurt. First, ALWAYS wear safety glasses. Metal shavings go flying when you cut a can, and if one gets in your eye, that\u2019s a hospital trip no one wants. Second, gloves\u2014work gloves, not those thin latex ones. The gloves will protect your hands from sharp edges while you\u2019re holding the can, and also from any metal shavings. Third, no bare hands near the blade, obviously. Keep your fingers at least an inch away from the path of the tool. And if you\u2019re using a power tool (rotary tool, coping saw), keep it away from water, and don\u2019t leave it plugged in when you\u2019re not using it.<\/p>\n<p>Wait, what about empty cans that still have pressure? No, right? Even if you uncrinkled the top, there\u2019s no pressure in a sealed empty can\u2014once a can is open, the pressure\u2019s gone. The only time you\u2019d have pressure is if you left it sealed but empty, which is super rare. So don\u2019t worry about the can exploding when you cut it\u2014 I\u2019ve cut thousands of these at our warehouse, and I\u2019ve never had one pop. The only exception is if it\u2019s a sealed soda can, but we\u2019re talking about empty ones, so you\u2019re good.<\/p>\n<p>Also, let\u2019s talk about mistakes to avoid. Number one: Using a kitchen knife. I\u2019ve done this once, when I was 16 and trying to make a can keychain. The knife slipped, cut my palm, and I had to get 2 stitches. Don\u2019t be like 16-year-old me. Number two: Dull blades. Like I said earlier, dull blades make you push harder, which leads to slips. Change your knife blade or sharpen your tin snips before you start. Number three: Not deburring. I made a planter last year for my mom\u2019s herbs, skipped the sanding step, and her finger got sliced when she tried to repot a plant. She still teases me about it. Don\u2019t do that. Number four: Cutting too fast. Take your time. This isn\u2019t a race\u201410 minutes of safe cutting is way better than 1 minute of rushing and getting hurt.<\/p>\n<p>Now, since I\u2019m a beverage can supplier, I have to mention something here. If you\u2019re doing this regularly\u2014like, if you\u2019re a crafter who makes can planters or jewelry to sell, or a small business that needs custom cut cans for packaging\u2014using high-quality, food-grade empty cans (wait, no, empty ones are still food-grade if they\u2019re not contaminated) is important. Bad, flimsy cans will bend while you\u2019re cutting, leading to uneven edges and more slips. All the cans we supply are made from sturdy, consistent aluminum or steel, so they cut cleanly every time, no warping mid-project. Just saying, if you\u2019re going to invest time in DIY, why not use a good can?<\/p>\n<p>Wait, let\u2019s do a quick recap for anyone who skimmed this:<\/p>\n<ol>\n<li>Prep your can: Rinse, dry, remove labels. 2. Pick the right tool: Utility knife (fresh blade), rotary tool with metal wheel, tin snips, or hand can cutter. 3. Mark your cut line with a ruler\u2014don\u2019t eyeball. 4. Hold the can steady, wear safety glasses and gloves. 5. Cut slowly, score multiple times if using a knife. 6. Deburr the edge with sandpaper. 7. Admire your DIY, no trips to the ER needed.<\/li>\n<\/ol>\n<p>Oh, and one last pro tip: If you\u2019re making multiple cuts for projects, sand all edges at the same time instead of doing it one by one. It saves time, and you get a consistent edge on all your pieces. I\u2019ve got a whole bin of sanded can pieces for our store\u2019s DIY section, and that trick cut my prep time in half.<\/p>\n<p>Look, I know cutting an empty can sounds like a super simple task, but it\u2019s way easier to mess up than you think. As someone who works with cans every single day, I\u2019ve got the scars (metaphorical, mostly) to prove that. But follow these steps, take it slow, and you\u2019ll have a clean, safe cut every time\u2014no cuts, no bent metal, no chaos.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.minjia-packing.com\/uploads\/42984\/small\/condensed-milk-tin-can512fc.jpg\"><\/p>\n<p>If you\u2019re someone who\u2019s looking for reliable, high-quality beverage cans for your projects, whether big or small, hit us up. We\u2019ve got all sizes, from 8oz mini cans to 24oz tallboys, and they\u2019re perfect for DIY, packaging, whatever you need. Shoot us a message to chat procurement, tell us what you\u2019re working on, and we\u2019ll hook you up.<\/p>\n<p><a href=\"https:\/\/www.minjia-packing.com\/canning-lids\/metal-can-lids\/\">Metal Can Lids<\/a> References:<\/p>\n<ol>\n<li>Occupational Safety and Health Administration (OSHA). &quot;Hazard Identification: Metalworking.&quot; U.S. Department of Labor, 2023.<\/li>\n<li>American National Standards Institute (ANSI). &quot;Safety Requirements for Metal Cutting Tools.&quot; ANSI, 2022.<\/li>\n<li>Aluminum Association. &quot;Properties and Uses of Beverage Can Aluminum.&quot; Aluminum Association, 2021.<\/li>\n<li>Tin Plate Technology Association. &quot;Tin-Plated Steel for Food Packaging and DIY Applications.&quot; Tin Plate Technology Association, 2020.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.minjia-packing.com\/\">Xiamen Uniteam Sourcing Co., Ltd.<\/a><br \/>As one of the most experienced beverage can manufacturers and suppliers in China, we also support customized service. Please feel free to buy high-grade beverage can made in China here from our factory. Quality products and reasonable price are available.<br \/>Address: ROOM 1511, NO. 939, XIAHE ROAD, SIMING DISTRICT, XIAMEN, FUJIAN, CHINA.<br \/>E-mail: operator@minjiapack.com<br \/>WebSite: <a href=\"https:\/\/www.minjia-packing.com\/\">https:\/\/www.minjia-packing.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, it\u2019s Jake here from your go-to beverage can supplier\u2014you know, the one that\u2019s got &hellip; <a title=\"How to cut an empty beverage can safely?\" class=\"hm-read-more\" href=\"http:\/\/www.christianfort.com\/blog\/2026\/11\/22\/how-to-cut-an-empty-beverage-can-safely-42fa-06feb3\/\"><span class=\"screen-reader-text\">How to cut an empty beverage can safely?<\/span>Read more<\/a><\/p>\n","protected":false},"author":13,"featured_media":3839,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3802],"class_list":["post-3839","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-beverage-can-453e-072acd"],"_links":{"self":[{"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/posts\/3839","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/users\/13"}],"replies":[{"embeddable":true,"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/comments?post=3839"}],"version-history":[{"count":0,"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/posts\/3839\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/posts\/3839"}],"wp:attachment":[{"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/media?parent=3839"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/categories?post=3839"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.christianfort.com\/blog\/wp-json\/wp\/v2\/tags?post=3839"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}