Posted in

What FAW engine parts are common for FAW Hongqi cars?

As a supplier of FAW engine parts, I’ve spent years working directly with repair shops, fleet managers, and individual Hongqi car owners who want genuine, reliable components—no cheap knockoffs or generic alternatives. If you own a Hongqi, whether it’s a classic model like the CA770 or a modern ride like the H5, HS5, or H9, your car’s performance ties back to how well its core engine parts fit and function. Let’s break down the most common FAW engine parts you’ll find on Hongqi models, and why sourcing them from a trusted supplier matters. FAW Engine Parts

First, let’s start with the heart of any internal combustion engine: the fuel injectors. For Hongqi’s line of turbocharged models—including the HS5’s 2.0T engine and the H9’s 2.0T variant—FAW-designed direct fuel injectors are non-negotiable. These aren’t standard injectors; they’re calibrated specifically to match the engine’s direct injection (DI) system, which delivers fuel at high pressure to boost power and cut emissions. I’ve seen too many owners swap in third-party injectors just to save money, only to deal with rough idling, reduced fuel efficiency, or even check engine lights within a few months. For Hongqi, a faulty injector (usually around 50,000 to 70,000 km of use) is one of the most common engine part failures, and only FAW-original injectors ensure the fuel spray pattern aligns with the engine’s combustion chamber design. As a supplier, we stock these for nearly every Hongqi model because they’re in high demand—whether for routine maintenance or replacing a part that’s worn out from long highway trips or city stop-and-go driving.

Next, oil pumps. This might not be the first part that comes to mind when you think of engine maintenance, but it’s critical for Hongqi’s engines. Hongqi uses either a gerotor-style oil pump (for naturally aspirated engines in older CA770 or entry-level H4 models) or a variable-displacement oil pump (for turbocharged modern models like the H5 and HS7). The variable-displacement type adjusts oil pressure based on engine load, which improves fuel economy and reduces wear. We’ve noticed that many Hongqi owners overlook oil pump inspections until they hear a knocking noise—usually at around 80,000 km. But a worn oil pump can cause low oil pressure, leading to engine seizing or permanent damage. That’s why we keep both types of oil pumps in stock: the original FAW units are built to match the engine’s oil circuit, so they fit perfectly without modification. Unlike aftermarket pumps, they also work with Hongqi’s electronic oil pressure sensors, which trigger dashboard alerts when levels drop.

Then there’s the timing belt or timing chain assembly. Wait, but for which Hongqi models? Older Hongqi models, like the 1960s CA72 and 1990s CA770, use a timing belt, which needs replacement every 60,000 to 80,000 km. Modern Hongqi models, though, switched to a timing chain for durability—though that doesn’t mean they never need attention. The timing chain tensioner, a small part of the assembly, is a common failure point on the H9’s 3.0T V6 engine. We’ve had fleet managers bring in multiple H9s where the tensioner wore out around 100,000 km, causing a rattling noise and, if ignored, potential engine misalignment. For timing belts, we supply the original FAW belts and idler pulleys too—because a generic belt can snap unexpectedly, which is catastrophic for an engine. Hongqi’s engines have interference designs, meaning if the timing belt breaks, the valves hit the pistons, leading to thousands in repairs. That’s why we emphasize to customers that using FAW-specific timing components isn’t just a preference—it’s a safeguard for their car’s longevity.

Another common part: the engine control unit (ECU) sensors, specifically the crankshaft position sensor and oxygen sensor. The crankshaft position sensor is key for tracking the engine’s speed and position, so it can time fuel injection and ignition correctly. On Hongqi’s 2.0T engines, this sensor often fails after 70,000 to 90,000 km, usually due to exposure to high heat under the hood. We stock these sensors because they’re a frequent replacement item—many owners don’t realize a bad crankshaft sensor causes stalling or difficulty starting, and they’ll try to troubleshoot with other parts first. The oxygen sensor, meanwhile, regulates fuel-air mixture to keep emissions within standards. Hongqi uses two oxygen sensors per turbo engine, and the upstream sensor (closer to the exhaust manifold) typically fails first, around 60,000 km. Aftermarket sensors often don’t match Hongqi’s calibration, leading to incorrect fuel mixture and lower fuel economy. Our customers often tell us that swapping in a genuine FAW oxygen sensor fixed their check engine light and restored their fuel efficiency by 5-10%.

Let’s not forget the water pump. Engine overheating is one of the most common reasons Hongqi owners bring their cars to repair shops, and the water pump is usually the culprit. Modern Hongqi models, like the HS5, use a electric water pump instead of a mechanical one, which is more efficient for modern engines. But electric pumps have electronic components that can wear out, especially if the cooling system isn’t flushed regularly. We’ve found that water pump replacements are needed around 90,000 to 110,000 km for these models. Older Hongqi models, like the CA770, use mechanical water pumps, which rely on the engine’s serpentine belt—so a worn pump can cause the belt to slip, leading to overheating. Using a FAW water pump ensures the impeller size is correct, so the cooling system circulates coolant evenly, preventing hot spots that can warp the engine cylinder head.

Now, why does being a FAW engine parts supplier matter here? A lot of online retailers sell “compatible” parts for Hongqi, but many of these are designed for generic engines, not the specific engineering of FAW’s powertrains. For example, a compatible fuel injector might fit physically, but its spray pattern isn’t calibrated for Hongqi’s combustion chamber, leading to incomplete fuel burn and higher emissions. As a supplier, we don’t just sell parts—we work with Hongqi repair technicians to understand which parts are most prone to failure, and we stock genuine FAW parts that match exactly. We also prioritize parts that are in demand for both classic and modern Hongqi models, since the Hongqi lineup has expanded a lot in recent years—from luxury sedans to SUVs, each with slightly different engine requirements.

One thing I’ve learned over the years is that Hongqi owners are loyal—they choose the brand for its heritage and quality, so they want their maintenance to match that. A friend of mine who owns a vintage CA770 told me he tried a generic timing belt once, and it snapped halfway on a road trip, costing him $3,000 in repairs. Now he only uses our FAW original belts. That’s the kind of story that makes me double down on supplying genuine parts—because it’s not just about selling a component, it’s about protecting someone’s investment in their Hongqi.

If you’re a repair shop owner looking to stock common FAW engine parts for Hongqi, or a Hongqi owner needing a replacement, we’ve got you covered. We stock everything from fuel injectors and oil pumps to timing assemblies and sensors, all tested to meet FAW’s original specifications. No knockoffs, no guesswork—just parts that fit, perform, and last.

Whether you’re maintaining a daily-driven H5 or a vintage CA770 that’s part of a collection, the right FAW engine part makes all the difference. If you’re ready to discuss your needs for Hongqi engine parts, connect with our team to find the right components for your model.

Shacman Engine Parts References

  1. FAW Group Hongqi Powertrain Specifications, 2023
  2. China Association of Automobile Maintenance, Hongqi Model Engine Part Failure Analysis, 2022
  3. Automotive Engineering International, Turbocharged Engine Component Durability for Chinese Luxury Vehicles, 2021

Shaanxi Onode Lubrication Technology Co., Ltd.
Shaanxi Onode Lubrication Technology Co., Ltd. is one of the leading faw engine parts manufacturers and suppliers in China. We warmly welcome you to wholesale cheap faw engine parts from our factory. All customized products are with high quality and low price.
Address: No. 9,Sanqiao Road, Fengdong New City, Xi‘xian New District, Xi’an , Shaanxi,China
E-mail: laifeng@onodetruckparts.com
WebSite: https://www.onodetruckparts.com/