Posted in

What is the standard footprint of a Funke Plate?

If you’ve ever worked with heat exchangers—whether you’re in food & beverage, pharmaceuticals, chemical processing, or power generation—you’ve probably heard the term “Funke plates” thrown around. As a supplier who’s been helping facilities source these components for over a decade, one of the most common questions I get isn’t even about material grade or pressure rating: it’s about the standard footprint of a Funke plate. People want to know if their existing gaskets, frames, or piping will work when they replace old plates, or if they need to redesign their setup entirely. I get it—no one wants to drop a ton of money on a new fit just because they miscalculated a plate’s footprint. Funke Plate

Let’s cut to the chase: there’s no single “one-size-fits-all” Funke plate, because Funke makes plates for every kind of heat exchanger, from tiny lab models to giant industrial units. But there are standard footprints that they use across their core product lines, and that’s what most of my customers actually need to know. First, I should clarify: when we talk about a plate’s footprint, we’re not just talking about the length and width of the metal sheet itself. We’re also counting the port positions—those big holes at the corners that let fluid flow in and out, plus the margin that sits between the plate edge and the frame to make sure the gasket seals properly. Skimp on that, and you get leaks; go too big, and you waste space.

Funke’s main standard plate series fall into three buckets, and each has its own go-to footprint. Let’s start with the smallest ones, which are mostly for pilot plants, lab testing, or small batch processes. Their FP 10 and FP 20 lines are the compact workhorses here. The FP 10 plate has a standard footprint of about 12 inches long by 8 inches wide, but wait—don’t mix up the plate’s metal surface with the overall footprint that includes the port area and gasket margin. The actual overall outer dimensions (what you’d measure if you laid a plate flat) are roughly 13.5 inches by 9.5 inches. The ports here are 1.5 inches in diameter, centered near each corner, so the total port-to-port span is around 11 inches lengthwise and 7 inches widthwise. These little plates are super common for small-scale food processing, like craft breweries pasteurizing their own wort, or labs testing new chemical reactions. I’ve sold hundreds of these, and I can tell you—they fit the same footprint across every FP 10 unit Funke has made in the last 15 years, no surprises.

Next up is the mid-size range, which is where most industrial operations live. The FP 50 and FP 100 series are the bread and butter for process heating and cooling. The FP 50 has a standard overall footprint of about 36 inches long by 18 inches wide. Wait, again—let’s be clear: the heat transfer surface itself is around 32 inches by 14 inches, but the outer frame edge and gasket add those extra inches. The ports here are bigger, too—3 inches in diameter—so the port-to-port span is roughly 32 inches lengthwise and 14 inches widthwise. These plates are used for things like pasteurizing bulk dairy products, or cooling industrial lubricants in manufacturing plants. Then there’s the FP 100, which is the next step up. Its standard footprint is 52 inches long by 26 inches wide, with a heat transfer surface of 48 inches by 22 inches, and 4-inch diameter ports. That’s the plate you’ll find in mid-sized power plants, or chemical facilities processing thousands of gallons of product per hour. The cool thing about these mid-size Funke plates is that the standard footprint hasn’t changed much since the early 2000s. We used to get calls years ago from customers panicking because they bought used plates from a 1998 FP 50, and they thought the footprint was different—but no, Funke locked in those standards a while back for compatibility.

Now, the big boys—ultra-large industrial plates. These are the ones for heavy-duty applications: large-scale HVAC, district heating, or petrochemical processing. The FP 200 and FP 400 lines fall here. The FP 200 has a standard footprint of 72 inches long by 36 inches wide, with heat transfer surface at 68 inches by 32 inches, and 6-inch ports. The FP 400, the largest standard Funke plate, checks in at 96 inches long by 48 inches overall, with a heat surface of 92 inches by 44 inches, and 8-inch ports. These plates aren’t cheap—each one is a solid chunk of stainless steel or titanium, depending on the fluid—so getting the footprint right is non-negotiable. I recently worked with a refinery that was expanding its cooling system, and they thought they’d have to rework their entire piping setup because they switched from a competitor’s plate to Funke’s FP 200. Turns out, Funke’s standard footprint lined up almost exactly with what they were already using, so they only had to swap out a few gaskets instead of tearing out pipes. Saved them like $50k in downtime alone.

Wait, but hold on—there’s a caveat here, and it’s one I always drill into my customers: these are standard footprints for gasketed Funke plates, which are the most common type. Funke also makes welded and semi-welded plates, which have slightly different footprints because they don’t use gaskets. For welded plates, the port positions are often the same, but the outer margin is smaller because there’s no gasket to seal, so the overall footprint is a bit slimmer. Also, if you have a custom application, Funke can make a plate with a non-standard footprint—like if you need a longer plate for a taller frame, or a narrower one to fit a tight space. But custom plates are way more expensive and take longer to deliver, so I always tell people to check if a standard footprint will work first.

Another thing that’s easy to mix up: some people confuse “footprint” with the heat transfer area of the plate. No, the footprint is the physical space the plate takes up when it’s flat, or when it’s installed in the heat exchanger. The heat transfer area is the surface that actually moves heat between the two fluids, which is a different number entirely. For example, an FP 50 plate has a heat transfer area of roughly 50 square feet, but its footprint is the 36×18 inch outer dimension. That’s a common mistake I see new operations make when they’re spec’ing out equipment. They’ll look at the heat area and assume the footprint is bigger, so they oversize their frame, which is just wasted money.

Let’s talk about why Funke even has these standard footprints, anyway. It’s all about compatibility and supply chain simplicity. Before they locked in these standards, every batch of plates might have been a little different, so facilities had to stock extra gaskets and just-in-case parts. Now, because the standard footprint is consistent across all units of the same series, customers can keep a stock of replacement plates on hand without worrying if they’ll fit. Funke also works with frame manufacturers (like Alfa Laval, Tranter, Apv—wait, not to name drop, but these are common frame makers) to make sure their frames align with the standard Funke plate footprints. So if you have a heat exchanger from another brand that takes Funke plates, you just need to match the series, and it’ll fit.

I should also mention that material can affect the footprint? No, not really. The standard footprint is the same whether a plate is made of 304 stainless, 316L, titanium, or even a specialty alloy like Hastelloy. The only time material changes the footprint is if you get a custom plate, where you might adjust the thickness slightly, but the overall length and width stay the same. The gasket is the other part—gaskets are sized for the standard footprint, so if you have a standard plate, you just order a gasket for that series, no need to measure each plate.

Now, let’s get real about how to confirm the footprint for your specific setup. A lot of customers will call me and say “I have an old Funke plate, what’s its footprint?” and I ask them two things first: what series is it (FP 10, FP 50, etc.)? and what year was it made? Because Funke updated a couple of minor dimensions for the FP 50 in 2010 to work with higher pressure ratings, but even then, the overall footprint only changed by half an inch—enough to mess up gaskets, but not enough to replace the whole frame. If you don’t know the series, just send me a picture with a tape measure along the longest and widest sides, and I can match it to the standard Funke series in two minutes. That’s way easier than guessing, trust me.

I’ve been doing this for long enough to know that one bad plate fit can bring a whole production line to a standstill. I had a customer a couple years back in the pharmaceutical industry—they were making vaccines, so downtime is not an option. They ordered replacement plates from a supplier who’d worked with “Funke plates before,” but didn’t confirm the standard footprint. The plates arrived, and their ports were half an inch off, so they had to take the whole system apart, replace the gaskets, and wait 3 days. That cost them hundreds of thousands of dollars in lost product. Since then, that customer checks the standard footprint with me before every order, and we haven’t had a single issue.

So to recap, the standard Funke plate footprints for their most common series are:

  • FP 10 (compact lab/pilot): 13.5” x 9.5” overall
  • FP 20 (small batch): 18” x 12” overall
  • FP 50 (mid-industrial): 36” x 18” overall
  • FP 100 (high-volume industrial): 52” x 26” overall
  • FP 200 (heavy-duty): 72” x 36” overall
  • FP 400 (ultra-large): 96” x 48” overall

Again, these are for gasketed plates, which are 90% of the Funke plates out in the field. Welded and semi-welded have slightly different footprints, and custom plates are available for special applications, but stick to these standards if you want fast, compatible replacements.

If you’re shopping for Funke plates and aren’t sure what footprint you need—whether you’re replacing old ones, upgrading an existing heat exchanger, or designing a new system—don’t guess. Hit me up, send over the specs you have, and I’ll walk you through confirming the right standard footprint, making sure the plates fit your frame, and even point you to compatible gaskets and parts. No sales pitch, just straight answers—this is what I do every day, and I know how frustrating it is when equipment doesn’t fit. Let’s make sure your next plate order goes smooth, no headaches, no downtime.

Tranter Plate References
Funke Heat Exchangers. (2022). Standard Plate Specification Guide: Gasketed Plate Series. Funke GmbH.
International Institute of Refrigeration. (2021). Plate Heat Exchanger Compatibility Standards for Industrial Applications. IIR Press.
Process Industries Equipment Association. (2020). Standard Dimensions for Heat Exchanger Components. PIEA Technical Bulletin 412.


WTSML Heat Transfer Technology Co., Ltd.
As one of the most professional funke plate manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to wholesale advanced funke plate made in China here from our factory. Customized orders are welcome.
Address: Qiaoxing Road 150, Torch Industrial Zone, Licheng Area, Quanzhou, Fujian, China
E-mail: phe@wtsml.net
WebSite: https://www.phe-service.com/